Omega-vehicle-security LVR2 Series Manuel d'utilisateur télécharger pdf

INSTRUCTION

SHEET

M-4211/0605

Shop online at: omega.com e-mail: [email protected]

For latest product manuals: omegamanual.info

Specifications

Sensing Length = __________ inches

Resolution = 1Inch

_____ Output: 4 to 20 mA, 2 wire Red(+) Black(-) ____ Output: 1 to 5 VDC, 3 wire

Output: 4 mA with float at bottom Red(+) Black(-) White (output)

Output: 20 mA with float at top Output: 1 V with float at bottom

_____ Output: Resistive, 220 Ω per 1 Inch of indication Output: 5 V with float at top

_____ Output Resistive, Non Linear per application

Temperature range: -40˚C to 85˚C, -40˚C to 105˚C with Resistive Output

Mounting: ___________________________

LVR2 Series

Continuous Level Sensors

LVR2 Series

Cautions

1. The pressure, temperature and electrical limitations

shown for the specified level sensor must not be exceeded.

2. The pressures and temperatures must take into

consideration possible surges in the temperature

and pressure of the system.

3. The liquids used must be compatible with the materials

of construction. Specifications of materials will be given

upon request.

4. Life expectancy of the sensor varies with applications.

5. Ambient temperature changes can affect sensor set points,

since specific gravities of liquids vary with temperature.

Consult factory for assistance.

6. Level sensors have been designed to be shock and

vibration resistant. For maximum life, both should be

minimized. Consult factory for assistance.

7. Excessive contaminants in fluid may inhibit float operation

and occasional wipe down may be necessary.

8. Physical damage to product may render product unserviceable.

9. Installation in a vessel made from magnetic materials may

affect operation.

General Information

1. Continuous Level Sensors

should be installed rigidly

so the float is free to move

as the liquid level changes.

2. Continuous Level Sensors

should be mounted in a tank

area free of severe turbulence

or protected from such

turbulence by appropriate and

adequate slosh shields.

3. Continuous Level Sensors

stems should be vertical for

best results, but satisfactory

operation is possible in most

liquids with the stem at up to a

30˚ angle from vertical.

4. Care should be taken that

Continuous Level Sensors are

always operated within

electrical ratings.

1 2

Résumé du contenu

Page 1 - Continuous Level Sensors

INSTRUCTIONSHEETM-4211/0605Shop online at: omega.com e-mail: [email protected] latest product manuals: omegamanual.infoSpecificationsSensing Length

Page 2 - RETURN REQUESTS / INQUIRIES

It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certi

Commentaires sur ces manuels

Pas de commentaire

Omega-vehicle-security LVR2 Series Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Omega-vehicle-security LVR2 Series. Omega Vehicle Security LVR2 Series User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Omega-vehicle-security LVR2 Series