Omega-vehicle-security LSC6400 Manuel d'utilisateur télécharger pdf (Page 3)

Unpacking Instructions

After opening the shipping carton, remove the molded foam top

from the carton. Remove the platform and place onto a flat,

level and steady surface. The 100 LB and 250 LB capacity platforms

are shipped with inserts to protect them from shock loading during

shipment. These inserts must be removed before attempting to

operate the platform.

To remove the foam inserts, begin by removing the top platform

cover. The inserts are corrugated cardboard blocks, placed between

the upper and lower frames of the platform. Simply slide these blocks

out and replace the platform cover.

Leveling the LSC6400

For best weighing results the platform should be properly leveled

before operating. To level:

• Remove the top platform cover to expose the level bubble

located on the top frame.

• Using the level bubble as a guide, adjust the four feet until

the bubble is centered in the level.

• When the platform is level, firmly tighten the hex jam nuts on

the feet.

• Replace the platform cover.

• Any time the platform is relocated, it should be re-leveled.

1 2 3 4 5 6

Pas de commentaire

Omega-vehicle-security LSC6400 Manuel d'utilisateur Page 3