Omega-vehicle-security LDN-PS Manuel d'utilisateur télécharger pdf (Page 16)

6.0: Specification (continued)

PSIM-AC PSIM-DC PSIM-5V

Line Voltage see note 1 5.1 Vdc Nominal as supplied by user

5.25 Vdc MAX

Input Current 1.8 A MAX

Connection see note 3 5m flying lead (Red = positive, White = negative)

Isolation None

Protection see note 2 Current limiting resettable fuse

Over voltage 112% to 132% of nominal

Reverse connection

Transient

Note 1: No isolation or regulation is provided by the PSIM-5V. The voltage required should be set as required

to ensure correct operating voltage for each PIE that follows the PSIM-5V. See application notes for

further information.

Note 2: If there is a fault condition caused, for example, by a short circuit or transient, the protection circuits

will operate. The power must be removed and the fault corrected before the power is reinstated.

Under a fault condition, Orbit modules will not function correctly and a power on reset is required.

See application notes for further information.

Note 3: Supplied with 5m input cable as standard. This may be cut to length as required.

PSIM-5V

LDN-PS

M-3340/1206

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Pas de commentaire

Omega-vehicle-security LDN-PS Manuel d'utilisateur Page 16