Omega Vehicle Security OMP-MODL Manuel d'utilisateur télécharger pdf (Page 168)

11.. . APPENDIX A: MASTER ICON FILE REFERENCE

USING THE OMP-MODL11-6

SUPPLY VOLTAGE (VBATT) INPUT ICON (SYSTEM BASE)

FUNCTION:

Used to take readings of the OMP-MODL internal Supply Voltage. If internal batteries are

installed in the OMP-MODL and an external power supply is also connected, the output

value will be the higher of the two.

The Supply Voltage output from this icon is representative of the voltage measured at an

internal node on the power supply circuitry. Displayed battery voltage is the voltage of the

internal batteries . External supply voltage will be approximately 2 volts higher than

indicated. If the Input Range Jumper (see MLCPU-1 section) is set to HI, the External

supply voltage will be approximately 3.5 volts higher than indicated.

INPUTS:

Hardware: No signal input shown on icon for Program Net connections. Input

signal comes from system voltage measurement.

Update Clock: Output is updated with new reading upon each Update Clock pulse

when Enable input is unconnected or HI.

Enable: Processing of icon is allowed when Enable pin is unconnected or

connected and Enable signal is TRUE.

OUTPUTS:

Output Signal: Data type signal. The Units of the output are Volts

ICON CONFIGURATION DIALOG BOX:

CONFIGURATION OPTIONS:

Icon Name: Specify the label for the icon. This name will show directly under

the icon within the Program Net.

Output Name: Specify the label for the Output. This name will show directly

under the Output terminal within the Program Net.

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 296 297

Pas de commentaire

Omega Vehicle Security OMP-MODL Manuel d'utilisateur Page 168