Omega-vehicle-security FPU5-MT-110 Manuel d'utilisateur télécharger pdf (Page 47)

6-10

Table 6-2 (cont’d) FLOW RATE MODE

KEY DISPLAY ACTION TAKEN

SHOWS AND PROCEDURE

TIME

FLOW

RATE

xx:xx:xx

Displays cumulative TIME

since start

Press the TIME key. The display flashes the time that the pump has

been running (xx:xx:xx).

xxx mL/min

xxx L/min

Displays current FLOW

RATE setting

1. Press the FLOW RATE key. The display flashes the flow rate

setting you selected just before starting the pump.

2. Use the UP and DOWN ARROW keys to enter the FLOW

RATE setting you desire. As you use the UP and DOWN

ARROW keys, the display changes accordingly. Refer to

Figure 6-4.

TOTAL

VOLUME

TUBE ID

xxx mL/min

xxx Liters

Displays current TOTAL VOLUME

Press the TOTAL VOLUME key. The display flashes the calculated

volume of fluid dispensed since the pump started running (xxx mL or

xxx Liters).

TUBE ID=xxx

Displays current TUBE ID

Press the TUBE ID key. If the red LED next to the CALIBRATE key

is not lit, the display flashes the current TUBE ID setting. If the red

LED next to the CALIBRATE key is lit, the display flashes the

message “CALIBRATED TUBE!”.

CALIBRATE

CALIBRATED!

not calibrated

Displays calibration state

1. Press the CALIBRATE key. If the red LED next to the

CALIBRATE key is not lit, the display shows “not calibrated”..

If the red LED next to the CALIBRATE key is lit, the display

shows “CALIBRATED!”.

To calibrate a tube:

2. Press the START/STOP key to stop the pump. The display

returns to the STOPPED Display Mode. For detailed instruc-

tions on “Calibrating a Tube”, refer to Section 5.5.

 and 

xxx mL/min

xxx L/min

NOTE: if you press the UP and DOWN ARROW keys, the display

shows the current FLOW RATE setting. This setting

changes accordingly as you use the UP and DOWN

ARROW keys but does not wrap around at maximum and

minimum values while the pump is running.

NOTE: if you press the Language button, the display changes to

the next language in the sequence: English, French,

Spanish, German, and Italian.

Language

Button

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 82 83

Commentaires sur ces manuels

Pas de commentaire

Omega-vehicle-security FPU5-MT-110 Manuel d'utilisateur Page 47

Commentaires sur ces manuels