Omega-vehicle-security FPU5-MT-110 Manuel d'utilisateur télécharger pdf (Page 52)

6-15

Table 6-3 (cont’d) TIME MODE

KEY DISPLAY ACTION TAKEN

SHOWS AND PROCEDURE

TIME

xx:xx:xx

Displays current TIME

setting

1. Press the TIME key. The display flashes the TIME setting you

selected just before starting the pump.

2. Use the UP and DOWN ARROW keys to enter the TIME

setting you desire. As you use the UP and DOWN ARROW

keys, the display changes accordingly. The SECONDS scroll,

When you reach 0 or 59 seconds, the minutes setting changes.

When you reach 0 or 59 minutes , the HOURS setting

changes. Refer to Figure 6-5.

NOTE: While the pump is running, you can not use the TIME key to

toggle from SECONDS to MINUTES TO HOURS.

FLOW

RATE

TOTAL

VOLUME

xxx mL/min

xxx L/min

Displays actual FLOW

RATE

Press the FLOW RATE key. The display flashes the calculated fluid

flow rate (xxx mL/min or xxx L/min).

xxx mL

xxx Liters

Displays cumulative TOTAL VOLUME since start

Press the TOTAL VOLUME key. The display flashes the calculated

volume of fluid dispensed since the pump started running (xxx mL

or xxx Liters).

TUBE ID

CALIBRATE

TUBE ID=xxx

Displays current TUBE ID

Press the TUBE ID key. If the red LED next to the CALIBRATE key

is not lit, the display flashes the current TUBE ID setting. If the red

LED next to the CALIBRATE key is lit, the display flashes the

message “CALIBRATED TUBE!”.

CALIBRATED!

not calibrated

Displays calibration state

1. Press the CALIBRATE key. If the red LED next to the

CALIBRATE key is not lit, the display shows “not calibrated”.

If the red LED next to the CALIBRATE key is lit, the display

shows “CALIBRATED!”.

To calibrate a tube:

2. Press the START/STOP key to stop the pump. The display

returns to the STOPPED Display Mode. For detailed instruc-

tions on “Calibrating a Tube”, refer to Section 5.5.

 and 

xx:xx:xx

NOTE: if you press the UP and DOWN ARROW keys, the display

shows the current TIME setting. This setting changes

accordingly as you use the UP and DOWN ARROW keys.

NOTE: if you press the Language button, the display changes to

the next language in the sequence: English, French,

Spanish, German, and Italian.

You will not notice this change unless the display

shows something other than time. It is easier to change

languages when you watch the display change.

Language

Button

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 82 83

Commentaires sur ces manuels

Pas de commentaire

Omega-vehicle-security FPU5-MT-110 Manuel d'utilisateur Page 52

Commentaires sur ces manuels