Omega-vehicle-security K9-6ATV2 Manuel d'utilisateur télécharger pdf (Page 9)

Feature #6: Doors Lock At Ignition "On" (Factory Setting ON)

Feature Turned On: The security system will automatically lock the vehicle's

doors one second after the ignition switch is turned "on". This feature adds

considerable personal security to you and your family.

Feature #7: Unlock Output #1 At Ignition "Off" (Factory Setting ON)

Feature #8: Unlock Output #2 At Ignition "Off" (Factory Setting OFF)

These Features will cause the security system to automatically unlock either the

driver's door or all of the vehicle's doors instantly when the ignition switch is turned

"off". Please note that the exact operating parameters of these Features depends

upon the configuration of the security system and your vehicle's power doorlocks.

This system may be configured to unlock only the driver's door upon disarming.

Then if desired, pressing the large transmitter button again within 5 seconds will

unlock all of the doors. These Features can operate one of two ways: first, if all of

the doors unlock upon disarming, these Features will unlock all of the doors

when the ignition is turned "off". Second, if your vehicle is configured to unlock the

driver's door only upon disarming, these Features can be configured to unlock only

the driver's door upon the ignition being turned "off". Please consult with the

installer as to the feasibility of adding the driver's door only unlock configuration

to your vehicle, as power doorlocking systems differ in compatibility to this feature.

Page - 32

Feature #9: Open Door Bypass To Features #6, #7, #8 (Factory Setting ON)

Feature Turned On: When the security system locks and unlocks the doors from

Features #6, #7 and #8, if a door is open the doors will not automatically lock when

the ignition switch turns "on", or automatically unlock when the ignition switch is

turned "off".

Feature #10: Lights On 5 / 30 Seconds Upon Disarm

(Factory Setting 30 Seconds)

Feature Turned On: Upon disarming, the exterior and interior lights will stay on

for 30 seconds, to illuminate the way to your vehicle.

Feature Turned Off: The exterior and interior lights will stay on for 5 seconds

when the system is disarmed.

Feature #11: Automatic Rearming (Factory Setting ON)

Feature Turned On: When the transmitter has disarmed the security system, the

system will rearm and relock the doors 90 seconds later, unless a door is opened or

the ignition is turned on. This feature prevents the system from being accidentally

disarmed if a transmitter button is unknowingly pressed by an object while in a

pocket or purse, or from children playing with the transmitter.

Page - 33

Feature Turned Off: When the transmitter has disarmed the security system, the

system will stay disarmed until the transmitter is used to arm it again.

Feature #12: 2nd Channel Output Disarms System (Factory Setting ON)

Feature Turned On: When the 2nd channel output is utilized, the security system

will also disarm at the same time, chirping the siren twice, unlocking the doors and

turning the exterior lights on for thirty or five seconds. The 2nd channel output, and

this feature, can be used for remote trunk release operation.

Feature #13: .8 / 3 Second Doorlock Pulse (Factory Setting .8 (ON)

Feature Turned On: The doorlock outputs have a .8 second negative pulse to an

optional doorlock interface to operate the vehicle's power doorlocking system.

Feature Turned Off: The doorlock outputs have a 3 second negative pulse to an

optional doorlock interface to operate the vehicle's vacuum doorlocking system.

Feature #14: Double Unlock Pulse (Factory Setting OFF)

Some newer vehicles require a doorlock interface which provides a double doorlock

output pulse to unlock all of the vehicle's doors. Feature #12 must be .8 second

doorlock pulse time (Feature #12 turned ON) for Feature #14 to operate.

Feature Turned On: The unlock output provides two pulses.

Feature Turned Off: The unlock output provides a single pulse.

Page - 34

Feature #15: 3 / 45 Second Arming Delay (Factory Setting 3 Seconds (ON)

Feature Turned On: The security system will be become fully armed 3 seconds

after the arming siren chirp confirmation.

Feature Turned Off: The security system will be become fully armed 45 seconds

after the arming siren chirp confirmation.

Note: During the arming delay if any protected circuit should go into a triggered

state, the system will arm, but that circuit will be unprotected until it reverts back

to an non-triggered state.

Feature #16: Confirmation Chirp (Factory Setting ON)

Feature Turned On: The security system will chirp the siren for confirmation that

the system armed and disarmed.

Feature Turned "Off": The security system will

not have siren chirps for the

arming and disarming confirmation. Turning this feature off will also eliminate the

three chirps upon arming if the instant trigger circuit is grounded, and the four chirps

upon disarming if the system was triggered and reset. However, the Prewarn Feature

and the Programmable Features chirps will still operate.

Regardless of this Feature, eliminating the siren chirp may be done on a onetime

temporary basis as desired by pressing the small left transmitter button twice for

arming or disarming. Even if this Feature is used to remove the confirmation chirps,

the audible Automatic Transmitter Verification

feature will still operate.

Page - 35

1 2 3 4 5 6 7 8 9 10

Commentaires sur ces manuels

Pas de commentaire

Omega-vehicle-security K9-6ATV2 Manuel d'utilisateur Page 9

Commentaires sur ces manuels