Omega-vehicle-security OMP-MODL Manuel d'utilisateur télécharger pdf (Page 133)

7... HYPERNET™ ICON BASED PROGRAMMING

USING THE OMP-MODL7-16

speed,wthe LCD should not be displaying updating information

(eg Probe Points, battery voltage, etc).

PROGRAM NET DOCUMENTATION

Two features are provided within the HyperNet Window to assist in documenting and

the ensuing field wiring of the OMP-MODL.

HyperNet Printout

The actual Program Net display can be printed by selecting Print Net from

the File menu.

NOTE: The PC must be set to 256 color mode in order

to properly print the Net.

Terminal Strip Wiring Printout

A Terminal Strip Wiring listing can be generated and printed for the Program

Net. This listing can then be used during the field wiring of the various I/O

signals to the logger terminal strips.

Upon completion of the Program Net, select View Wiring/Connection list

from the File menu, enter a filename, and the file will be generated and

saved as an ASCII text file. A text editor will automatically open the file.

The listing can then be printed from within the editor and carried with the

OMP-MODL to the installation site.

The Wiring Listing includes the connections for each of the I/O channels that

is used in the Program Net as well as standard connections for External

Power, the Digital Port and the CJC connector. Names assigned to Input

and Output icons in the Program Net are used for channel identification.

At the bottom of the Wiring I/O Listing are various notes relative to other

connections such as modem. These notes are imported from a file called

NOTES.TXT which is supplied in HyperWare. Reminders and special

installation comments can be added by the User to the NOTES.TXT file by

editing the file with any text editor (such as Notepad). After editing, the

revisions will appear on the WiringListing each time a listing is generated

from within HyperNet.

PROGRAM NET UPLOAD TO THE OMP-MODL

After the Program Net has been checked and saved, clicking on the HyperComm

Window button will return HyperWare to the HyperComm Window. The Program Net

icon displayed on the PC graphic represents the last edited Program Net. Drag and

drop the Program Net icon from the PC to the serially connected OMP-MODL or to

the PCMCIA card drive to upload the new Program Net.

Refer to Chapter 5, HyperComm Serial Communications for details of the Program

Net serial link uploading procedure or to Chapter 6 for details on using the PCMCIA

card.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 296 297

Pas de commentaire

Omega-vehicle-security OMP-MODL Manuel d'utilisateur Page 133