Omega-vehicle-security OMP-MODL Manuel d'utilisateur télécharger pdf (Page 220)

11.. . APPENDIX A: MASTER ICON FILE REFERENCE

USING THE OMP-MODL11-58

ICON CONFIGURATION DIALOG BOX:

CONFIGURATION OPTIONS:

Icon Name:Specify the label for the icon. This name will show directly under the icon

within the Program Net.

Input Name: In this box, HyperNet displays the Output Name of the icon connected to

this icon’s Input. The Output Name can be changed in the other icon’s

dialog.

Output after __ Samples: Specify the number of input readings to totalize before

outputting the sum of the input readings.

Output current Value upon disable: Check this box to force an output of the current

Sum Value at any time that the icon is disabled. If this box is not checked,

upon receipt of a disable signal, the Summation calculation will be

momentarily suspended until the icon is re-enabled and no in-process value

will be output.

For example, if a Sum is to be calculated over 10 samples but only 7 have

been analyzed and the icon is disabled, the 7 sample Summation Value will

be output and the Summing calculation will be suspended until re-enabled.

Upon re-enable, the summing will continue and after 3 more samples are

received, the 10 sample Summation Value will be output (unless the

following check box is checked)

Clear Sample Count and Sum upon Enable: Check this box to force a reset of the

Summation Value as well as the Sample count used used for the

calculation upon receipt of an Enable signal.

If this box is not checked, upon receipt of an Enable signal, the Summation

calculation will proceed from its suspended state (that it entered when it

was disabled).

Clear Sum after Output: Check this box to force the Sum Value to be reset to 0 after

Output. If this box is not checked, the icon will perform as a totalizer

Units: Provides a text box for User entry of a units label that will be shown at the

output from this icon.

Output Name: Specify the label for the Output. This name will show directly

under the Output terminal within the Program Net.

1 2 ... 215 216 217 218 219 220 221 222 223 224 225 ... 296 297

Pas de commentaire

Omega-vehicle-security OMP-MODL Manuel d'utilisateur Page 220